PORSCHE 997 A C SYSTEM
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 GT3 2007-11 (includes uncategorized and accessory items)
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell hdl German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming not ne...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,665.10
Make a selection
Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
* 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
* 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
* 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period.
Orang...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
From $416.58
Make a selection
tr!ckstuff ts66 performance racing - red ece-r90 tüv
Our ultimate racing brake pad with carbon is designed for the race conditions up to 6 hrs and it shows its full potential here. It is resistant to fading above 650°c and has an extremely high coefficient of friction. The matrix of the mixture ensures a constant brake performance even in wet weather conditions.
Fits: GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, turbo (07-09), Carrera 4s, 3.8l, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08), GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT2 (01-05), turbo (01-05)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05
Renn gurt ? 6-punkt fuer "hans"
6-punkt profi renngurt mit schroth rfrtm-drehverschluss am schrittgurt ? Abgestimmt fuer GT3 mit 75 mm (3?) schultergurten mit schlauftechnik, 50 mm (2?) beckengurte in pull-down version mit speziellen Porsche schraubbeschlägen und schrittgurte mit ausklinkbeschlägen zur ringschraubenmontage, die optional auch an einer traverse mit schlauftechnik befestigt werden können. Zur verwendung dieses gurtes muss der sitz durchbrüche für die schultergurte und schrittgurte haben. Passend für alle GT3 käfiginstallationen.
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 (08-09), GT3 rs (04-), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
Porsche renn gurt ? Porsche GT3, 6-punkt
6-punkt profi renngurt mit schroth rfrtm-drehverschluss am schrittgurt ? Abgestimmt auf Porsche GT3 mit 75 mm (3?) schultergurten mit schlauftechnik, 50 mm (2?) beckengurte in pull-down version mit speziellen Porsche schraubbeschlägen und schrittgurte mit ausklinkbeschlägen zur ringschraubenmontage, die optional auch an einer traverse mit schlauftechnik befestigt werden können. Zur verwendung dieses gurtes muss der sitz durchbrüche für die schultergurte und schrittgurte haben. Passend für alle GT3 käfiginstallationen ab Porsche modell 996.
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 (08-09), GT3 rs (04-), GT3 0...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
Renn gurt - 6-punkt fuer "hans"
6-punkt profi renngurt mit schroth rfrtm-drehverschluss am schrittgurt - abgestimmt fuer GT3 mit 75 mm (3'') schultergurten mit schlauftechnik, 50 mm (2'') beckengurte in pull-down version mit speziellen Porsche schraubbeschlägen und schrittgurte mit speziellen schraubbeschlägen. Zur verwendung dieses gurtes muss der sitz durchbrüche für die schultergurte und schrittgurte haben. Passend für alle Porsche GT3 modell 997 käfiginstallationen.
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 (08-09), GT3 rs (04-), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
Renn gurt - 6-punkt fuer "hans"
6-punkt profi renngurt mit schroth rfrtm-drehverschluss am schrittgurt - abgestimmt fuer GT3 mit 75 mm (3'') schultergurten mit schlauftechnik, 50 mm (2'') beckengurte in pull-down version mit speziellen Porsche schraubbeschlägen und schrittgurte mit speziellen schraubbeschlägen. Zur verwendung dieses gurtes muss der sitz durchbrüche für die schultergurte und schrittgurte haben. Passend für alle Porsche GT3 modell 997 käfiginstallationen.
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 (08-09), GT3 rs (04-), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
Porsche GT3 cup cars come with schroth belts direct from the factory. If you need to replace these belts due to an accident, or if you’re putting the factory GT3 seat setup into another car, you will want to use these belts.
They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which makes it much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
Renn gurt - 6-punkt fuer "hans"
6-punkt profi renngurt mit schroth rfrtm-drehverschluss am schrittgurt - abgestimmt fuer GT3 mit 75 mm (3'') schultergurten mit schlauftechnik, 50 mm (2'') beckengurte in pull-down version mit speziellen Porsche schraubbeschlägen und schrittgurte mit speziellen schraubbeschlägen. Zur verwendung dieses gurtes muss der sitz durchbrüche für die schultergurte und schrittgurte haben. Passend für alle Porsche GT3 modell 997 käfiginstallationen.
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 (08-09), GT3 rs (04-), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,549.20
Make a selection
Renn gurt - 6-punkt fuer "hans"
6-punkt profi renngurt mit schroth rfrtm-drehverschluss am schrittgurt - abgestimmt fuer GT3 mit 75 mm (3'') schultergurten mit schlauftechnik, 50 mm (2'') beckengurte in pull-down version mit speziellen Porsche schraubbeschlägen und schrittgurte mit speziellen schraubbeschlägen. Zur verwendung dieses gurtes muss der sitz durchbrüche für die schultergurte und schrittgurte haben. Passend für alle Porsche GT3 modell 997 käfiginstallationen.
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 (08-09), GT3 rs (04-), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- catalytic bypass
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup car. Our exhaust ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,331.80
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary on 997.2 GT3
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $6,698.73
Make a selection
The harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev. Mar 95, motor vehicle seat belt anchorages-performance requirements.
The harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high g loads of cornering and braking.
Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.
Strength requirements for ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
"brombacher" exhaust system for 997 GT3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up for maximum torque gain
- weighs 71 lbs. (32,2 kg),
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) round center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- bypass-catalytics
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming necessary 2nd gen
The FVD...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $3,177.67
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with 2 x 90mm tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs ?hd? Sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) saving?s over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- intox...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,702.68
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$20,056.30
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,996.00
Make a selection
"brombacher" racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weights 6 kg
- 33 kg savings over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- no dme programming neces...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,661.10
Make a selection
Brombacher race exhaust system for 997 GT3/rs (super sound) with rsr style tips & center muffler adapters to run stock center muffler.
Facts:
- + 25 crank hp & + 25 crank torque with use of stock center muffler.
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (90 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 34.7 lbs. (15.7 kg) this is the lightest stainless system in the Brombacherline !**
- 51.8 lb (23.5 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- bypass' center muffler with straight p...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$4,978.60
Make a selection
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
"brombacher" titanium race system (sound version) for GT3/rs
Facts:
- + 20 crank hp & + 19 crank torque.
- complete system in titanium (without sidemufflers)
- 200 cell high flow, titanium tri metal German hjs sport catalysts
- 2 x 90mm tailpipes.
- weighs 28.6 lbs (13kg)!
- 1000 degree celcius, high grade titanium material
- 105-107 db
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
The titanium tips can be ordered ?flamed? Which exhibit?s the blue tint.
All titanium systems not created equal! Brombacher exhausts systems are nearl...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$13,066.90
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with rsr style tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs "hd" sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- into...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,106.10
Make a selection
Product details:
Superb dual-tone sports car sound; throaty and deep at idle and medium speeds
Features:
-fits all Porsche 997 GT3 / GT3 rs vehicles 2006-2009
-increases horsepower and torque by 11 whp and 8 ft-lbs
-mini maxflo are radius stress relieved, hydro-formed cases that are pulse tig welded using 2000 degree ceramic fiber and stainless steel wool packing.
-constructed from high quality 14-16 gauge, c.n.c. Mandrel bent t304l stainless steel
-retains sport mode button when used with factory side mufflers
-simple bolt-on installation
-all fabspeed pe...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$2,295.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|